Double Glazing Locks Repair
If a double-glazed window won't close it creates drafts and allows heat to escape. This can also compromise the security of your home and puts you at a higher risk of burglary.
Over double glazing repairs , double-glazed window hinges handles, seals and handles can be damaged. If this happens it can impact the functionality of your windows and cancel any warranties you may have.
Faulty locks
Many people put anti-burglar systems on their main gates and doors However, they tend to forget that windows are the most frequent targets for burglars. Having faulty locks can cause drafts inside the home, which can allow valuable heat to escape, and weaken your home's security.
If you find that your uPVC window locks are not working, there is likely that the lock mechanism has become jammed. This is typically because of a crack in the gearbox component. This could cause the handle not to open, but to rotate 360 degrees. This issue is common with uPVC windows, however it is also a problem in tilt-and-turn windows as well as sliding sash windows.
If this happens, you can unlock the lock by pressing the lever handle. This can be used to unblock the gearbox and then restore the window's opening. If this does nothing it is possible to replace the entire window lock mechanism.
Most modern uPVC windows use espagnolette locks. They are a locking system inside the window that secures the window by utilising mushroom-like locking cams that are built into the frame. The handle is the trigger for the gearbox, which activates the cams to allow either up or down movement. The spindle of the lock could break which causes the handle to move but the window to either open or close.
A damaged transmission could make your window appear locked, but it is not. This could happen when the centre rods, also known as crocodile tooth fixings within the gearbox break off. If this is the case, Misty Glaze can supply and install replacement rods to restore the operation of your window.
It is crucial not to try to force a stuck or broken lock. This can cause the lock to snap or break - particularly with a window made of uPVC because it expands and expands as it warms and cools. To prevent this from happening problem, it is recommended to contact a professional locksmith to determine the problem and fix it.
Sticky Doors/Window
It is annoying to find doors and windows that stick, but they may also indicate more serious structural issues. It is essential to seek professional help if you have difficulties opening or closing windows or doors. This could be the result of various factors, including foundation settlement and weak crawl space support.
Windows and doors can get stuck due to humidity or an issue with the frame itself. If your frames are wood for instance, they can become brittle when exposed to humidity. Even if the hardware appears great, this could make it difficult to open and close your frames. The wood swells when this happens, and it is pushed up against the hinges, causing friction.
If your window or door gets stuck in the summer you can try rubbing it with bar soap to reduce the friction. This will allow it to shrink and may resolve the problem temporarily. This procedure will have to be repeated frequently during periods of high humidity.
Sanding the frame of the window or door to a smooth surface is a more permanent fix. You can do this by hand or with a power tool. A professional can also sand and paint or stain your frame or door to make it look new once more.
If the sanding and soap don't help it's likely your problem stems from foundation settlement or a weak crawl space. Check for cracks in the area. It's time to contact an expert in foundation if you see any of these signs. Foundation damage can result in uneven floors, a misaligned wall and stuck windows and doors. To avoid costly and dangerous repairs, it's essential to address these issues as soon as possible. These issues can get worse until your home is unsafe to live in if it is not taken care of. Contact the Southeast's most renowned foundation repair experts today to set up an inspection and repair!
Cracking/Blowing Issues
When double glazing starts to degrade, it can cause cracks to appear. It can be unappealing and also allow all the heat that has been built up in your home to escape. It also poses dangerous for your family, as the glass's sharp edges can cause injury in the event that they break. It is best to repair any double glazing windows that have cracks prior to it getting worse, as this may increase the cost of replacing them.
Window seals are vital to stop drafts from entering your home and to keep air between the window panes. However, over time, they may become damaged or shrink due to weather changes. If not taken care of, it could cause condensation, moisture, and draughts in your home.
This issue is typically solved by a professional. They can repair the window seal in order to restore your windows to their original condition. They can also recommend additional features that can reduce the possibility of a stress fracture occurring in the future, such as trickle vents for better ventilation.
You can also grease the handles and hinges of your windows and door. This will allow them to move more easily, and the lock to function as it should. Rub lubricating oils onto a lint free cloth and rub them into the hinges, handle mechanism and places where they go through frames (for instance, a window with sash). You can also remove the handles and clean them with warm soapy water to wash away any dirt or grit.
If your uPVC doors and windows aren't functioning as they should, it is crucial to contact an expert to fix them. They will be able to identify the problem quickly and resolve the issue within a short amount of time. It's a lot less expensive and safer than trying to do it yourself and possibly harming the mechanism. You will also have peace of mind knowing your home is secure and secure.